复合材料用国产中温固化结构胶膜性能研究
作者:
作者简介:

王伟翰,男,硕士,助理工程师。主要研究方向:聚合物基复合材料及胶黏剂。E-mail:buctwangweihan@qq.com

通讯作者:

王伟翰,E-mail:buctwangweihan@qq.com

中图分类号:

TB332


Study on properties of domestic medium temperature curing structural adhesive film for composite materials
Author:
  • 摘要
  • | |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • | | |
  • 文章评论
    摘要:

    研制了一种新型国产中温固化结构胶膜ACTECH?1206F,通过DSC、流变、挥发分和单位面积重量等测试表征其理化性能,通过单搭接剪切强度、滚筒剥离强度、平面拉伸强度等测试表征其对不同基材的粘接性能,并与目前常用的进口胶膜FM-73进行对比试验。结果显示,与FM-73相比,ACTECH?1206F胶膜在室温下Al-Al单搭接剪切强度、室温下碳纤复合材料单搭接剪切强度、室温下蜂窝夹层结构平面拉伸强度等方面表现较好,室温下Al-Al单搭接剪切强度可达37.7 MPa,室温下碳纤复合材料(BA3202W)单搭接剪切强度可达28.8 MPa,室温下蜂窝夹层结构平面拉伸强度可达10.32 MPa。同时,通过SEM观察了ACTECH?1206F胶膜树脂浇铸体的断口形貌,断口较为粗糙,具有明显的曲折裂痕,是典型的韧性断裂,表明ACTECH?1206F胶膜树脂具有良好的韧性。整体来看,ACTECH?1206F胶膜整体性能与FM-73大致相同,可以基本满足民机复合材料领域对中温固化结构胶膜的需求。

    Abstract:

    A new type of domestic medium temperature curing structural adhesive film ACTECH?1206F was developed. Its physical and chemical properties were characterized by DSC, rheology, volatilization and weight per unit area, and its bonding properties to different substrates were characterized by single lapping shear strength, roller stripping strength and plane tensile strength, and were compared with the current commonly used imported adhesive film FM-73. The results showed that compared to FM-73, ACTECH?1206F film performs well in terms of Al-Al single lap shear strength at room temperature, carbon fiber composite single lap shear strength at room temperature, and plane tensile strength of honeycomb sandwich structure at room temperature. Al-Al single lap shear strength at room temperature can reach 37.7 MPa, the single lap shear strength of carbon fiber composite (BA3202W) at room temperature can reach 28.8 MPa, and the plane tensile strength of honeycomb sandwich structure can reach 10.32 MPa at room temperature. At the same time, the fracture morphology of ACTECH?1206F resin casting body was observed by SEM. The fracture is rough and has obvious zigzag cracks, which is typical ductile fracture, indicating that ACTECH?1206F resin has good toughness.On the whole, the overall performance of ACTECH?1206F film is roughly the same as that of FM-73, which can meet the demand for medium-temperature curing structural film in the field of civil aircraft composites.

    参考文献
    [1] 益小苏,张明,安学锋,等.先进航空树脂基复合材料研究与应用进展[J].工程塑料应用,2009,37(10):72-76.
    [2] 关志东.现代大型客机复合材料应用及技术发展[C]//中国力学学会.第十五届全国复合材料学术会议论文集(上册).北京:国防工业出版社,2008:19-23.
    [3] 曲春艳,王致禄.石化院胶黏剂研究开发的回顾与展望[C]//2000年中国粘接学术论丛.中国粘接学术研讨会及产品展示会.[S.l.:s.n.],2000.
    [4] 匡弘,付刚,于昕,等.中温固化结构胶黏剂现状与发展趋势[C]//2000年中国粘接学术论丛.中国粘接学术研讨会及产品展示会.[S.l.:s.n.],2000.
    [5] 马海全.胶接结构加速试验及寿命可靠性评估技术[D].南昌:南昌航空大学,2010.
    [6] 张新建,吴宏亮,陈洁,等.民用飞机胶接技术应用分析[J].航空制造技术,2014(17):46-49.
    [7] 李欣,张晓妮,徐晓沐.胶接结构和复合材料用于航空航天技术的发展[J].化学与黏合,2006,28(3):172-175.
    [8] 王起.国外民用客机连接技术发展概况[J].航空工艺技术,1997(3):21-22,25.
    [9] 梁滨,刘清方,赵升龙,等.可控流动性胶膜的研究[C]//2004北京国际粘接技术研讨会论文集.[S.l.:s.n.],2004.
    [10] 罗华健.环氧化苯氧树脂增韧耐高温环氧树脂的研究[D].广州:华南理工大学,2019.
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文

王伟翰,张思,张宝艳,等.复合材料用国产中温固化结构胶膜性能研究[J].民用飞机设计与研 究,2023(4):43-49WANG Weihan, ZHANG Si, ZHANG Baoyan, et al. Study on properties of domestic medium temperature curing structural adhesive film for composite materials[J]. Civil Aircraft Design and Research,2023,(4):43-49. ( in Chinese)

复制
分享
文章指标
  • 点击次数:156
  • 下载次数: 762
  • HTML阅读次数: 191
  • 引用次数: 0
历史
  • 在线发布日期: 2024-01-17

微信公众号二维码

手机版网站二维码

我要投稿 投稿指南 联系我们 二维码
TOP
×
《民用飞机设计与研究》
关于《民用飞机设计与研究》期刊网站升级的重要通知